REF: SEHB1000B

MATERIAL SAFETY DATA SHEET

PAGE 1 OF 4

COMPANY:

MACLEOD INDUSTRIES AUSTRALIA PTY LTD

DATE OF ISSUE:

JUNE 2004

PRODUCT NAME:

SWIFTEPOXY HB, PART B

THIS PRODUCT IS HAZARDOUS ACCORDING TO THE CRITERIA OF WORKSAFE AUSTRALIA

THIS PRODUCT IS USED IN CONJUNCTION WITH SWIFTEPOXY HB, PART A. ENSURE YOU

HAVE BOTH MATERIAL SAFETY DATA SHEETS IN YOUR POSSESSION.

COMPANY DETAILS: MACLEOD INDUSTRIES AUSTRALIA P/L

ABN 31 072 805 513

UNIT 7 / 21 MALVERN STREET BAYSWATER VIC 3153 AUSTRALIA

PHONE: +613 9729 7100 OR 1800 44 76 33

EMERGENCY AFTER HOURS: 0407 553 856

FAX: +613 9729 7400

UN NUMBER:

1263 (PAINT AND PAINT RELATED MATERIAL)

DANGEROUS GOODS CLASS:

3.2

SUBSIDIARY RISK:

8

HAZCHEM CODE:

3W

PACKAGING GROUP:

III

POISONS SCHEDULE:

5

USE:

PART B OF A 2-COMPONENT COATING FOR STEEL AND

CONCRETE.

APPEARANCE:

PHASED LIQUID, DARK YELLOW BAND ON TOP OF

CLEAR LIQUID.

ODOUR:

AMINE ODOUR

BOILING POINT:

80º C

VAPOUR PRESSURE:

O.6kPa AT 20º C

SPECIFIC GRAVITY:

1.0

FLASH POINT:

35º C

pH:

APPROXIMATELY 11 (1:1 WITH WATER)

SOLUBILITY IN WATER:

PARTIALLY SOLUBLE IN WATER

INGREDIENTS:

CHEMICAL NAME:

CAS NUMBER

MASS PERCENT

CLASSIFICATION/RISK

BENZYL ALCOHOL

100-51-6

20 - 40%

Xn;

R20/22

ISOPHORONEDIAMINE

2855-13-2

APPROX 18%

NOT LISTED NOHSC

ETHANOL

64-17-5

3 - 5%

F, R11

4-NONYL PHENOL

25154-52-3

LESS THAN 3%

NOT LISTED NOHSC

2, 4, 6-TRIS(DIMETHYL-

AMINOMETHYL)PHENOL

90-72-2

LESS THAN 2%

BELOW CUT-OFF VALUE

OTHER INGREDIENTS NOT HAZARDOUS UNDER WORKSAFE GUIDELINES TO 100%

REF: SEHB1000B

MATERIAL SAFETY DATA SHEET

PAGE 2 OF 4

COMPANY:

MACLEOD INDUSTRIES AUSTRALIA PTY LTD

DATE OF ISSUE:

JUNE 2004

PRODUCT NAME:

SWIFTEPOXY HB, PART B

THIS PRODUCT IS HAZARDOUS ACCORDING TO THE CRITERIA OF WORKSAFE AUSTRALIA

THIS PRODUCT IS USED IN CONJUNCTION WITH SWIFTEPOXY HB, PART A. ENSURE YOU

HAVE BOTH MATERIAL SAFETY DATA SHEETS IN YOUR POSSESSION.

THIS PRODUCT IS CLASSIFIED AS HARMFUL (Xn), USING THE APPROPRIATE AUSTRALIAN CRITERIA.

THIS PRODUCT IS FLAMMABLE AND CORROSIVE.

SWALLOWED:

MAY CAUSE VOMITING. MAY CAUSE NAUSEA. LARGE AMOUNTS MAY CAUSE

BURNS TO LIPS, MOUTH, AND ESOPHAGUS.

EYE:

CORROSIVE TO EYES, MAY CAUSE CORNEAL BURNS OR OEDEMA.

SKIN:

CORROSIVE TO SKIN. MAY CAUSE SKIN BURNS. MAY CAUSE SKIN

SENSITISATION.

INHALED:

SOME COMPONENTS OF THIS MIXTURE ARE IRRITATING TO MUCOUS

MEMBRANES AND RESPIRATORY TRACT. INHALATION OF SIGNIFICANT

AMOUNTS OF THE SOLVENTS IN THIS PRODUCT MAY RESULT IN HEADACHES,

DIZZINESS, AND POSSIBLE NAUSEA.

SWALLOWED:

NOT APPLICABLE.

EYE:

REPEATED OR PROLONGED CONTACT WITH EYES MAY RESULT IN PERMANENT

DAMAGE.

SKIN:

PROLONGED OR REPEATED CONTACT MAY LEAD TO DERMATITIC EFFECTS. THIS

PRODUCT IS A SKIN SENSITISER.

INHALED:

INHALATION OF HIGH CONCENTRATIONS OF VAPOUR OVER A PERIOD OF TIME

MAY CAUSE DAMAGE TO THE RESPIRATORY TRACT.

SWALLOWED:

GIVE PLENTY WATER TO DRINK. DO NOT INDUCE VOMITING.

SEEK IMMEDIATE MEDICAL ASSISTANCE. ADMINISTER ACTIVATED CHARCOAL

SLURRY, IF AVAILABLE. IF VICTIM VOMITS, ENSURE AIRWAY IS NOT

OBSTRUCTED. ADMINISTER OXYGEN OR ARTIFICIAL RESPIRATION, IF NEEDED.

EYE:

IRRIGATE EYE WITH COPIOUS AMOUNTS OF WATER. HOLD EYE(S) OPEN

AND FLUSH WITH WATER FOR 15 MINUTES OR UNTIL IRRITATION CEASES.

SEEK IMMEDIATE MEDICAL ASSISTANCE.

SKIN:

WASH CONTAMINATED AREA WITH SOAP AND WATER. DO NOT WASH

SKIN WITH SOLVENTS. REMOVE CONTAMINATED CLOTHING. IF

IRRITATION PERSISTS, OR IF VICTIM FEELS UNWELL, SEEK MEDICAL ADVICE.

INHALED:

REMOVE VICTIM FROM EXPOSURE. AVOID BECOMING A VICTIM. ENSURE

VICTIM HAS A SUPPLY OF FRESH AIR. SEEK MEDICAL ADVICE IF FULL RECOVERY

DOES NOT OCCUR.

ADVICE TO MEDICAL PERSONNEL: NO SPECIFIC ANTIDOTE. TREAT SYMPTOMATICALLY. THIS

PRODUCT IS A CORROSIVE ALKALINE. POISONS INFORMATION

CENTRES IN EACH STATE CAPITAL CAN PROVIDE ADVICE FOR

SCHEDULED POISONS.

REF: SEHB1000B

MATERIAL SAFETY DATA SHEET

PAGE 3 OF 4

COMPANY:

MACLEOD INDUSTRIES AUSTRALIA PTY LTD

DATE OF ISSUE:

JUNE 2004

PRODUCT NAME:

SWIFTEPOXY HB, PART B

THIS PRODUCT IS HAZARDOUS ACCORDING TO THE CRITERIA OF WORKSAFE AUSTRALIA

THIS PRODUCT IS USED IN CONJUNCTION WITH SWIFTEPOXY HB, PART A. ENSURE YOU

HAVE BOTH MATERIAL SAFETY DATA SHEETS IN YOUR POSSESSION.

CHEMICAL NAME:

CAS NUMBER

MASS PERCENT

TYPE

VALUE

BENZYL ALCOHOL

100-51-6

20 - 40%

NONE ESTABLISHED

ISOPHORONEDIAMINE

2855-13-2

APPROX 18%

NONE ESTABLISHED

ETHANOL

64-17-5

3 - 5%

TLV

1900mg/m3

4-NONYL PHENOL

25154-52-3

LESS THAN 3%

NONE ESTABLISHED

2, 4, 6-TRIS(DIMETHYL-

AMINOMETHYL)PHENOL

90-72-2

LESS THAN 2%

NONE ESTABLISHED

OTHER INGREDIENTS NOT HAZARDOUS UNDER WORKSAFE GUIDELINES TO 100%

AS A NUMBER OF THE CHEMICAL ENTITIES HAVE NO TLV OR TWA APPROVED BY NOHSC, IT IS RECOMMENDED

THAT CARE BE TAKEN WITH EXPOSURE. PLEASE FOLLOW ALL RECOMMENDED PROCEDURES FOR PERSONAL

PROTECTION.

THE WORKPLACE OR SITE WHERE THIS PRODUCT AND ITS RESIN AND SOLVENT ARE BEING USED, SHOULD BE

VENTILATED SUFFICIENTLY TO ENSURE THAT EXPOSURE TO THE CHEMICAL ENTITIES IN THIS PRODUCT ARE

BELOW THE APPROPRIATE LIMITS.

ENSURE AIRFLOW WHERE THIS PRODUCT IS BEING USED. WHERE SUFFICIENT AIRFLOW DOES NOT EXIST, USE

APPROPRIATE PERSONAL PROTECTION, AS INSTRUCTED.

IF FULLY CURED EPOXY COATING MADE FROM THIS PRODUCT IS CUT OR ABRADED, PLEASE ENSURE THAT CARE IS

TAKEN TO AVOID ANY RESIRABLE OR INSPIRABLE DUST CREATED.

AVOID CONTACT WITH EYES. AVOID SKIN CONTACT. AVOID CONTACT WITH CLOTHING.

SOLVENT RESISTANT GLOVES SHOULD BE USED (TREATED NITRILE OR PVC).

OVERALLS SHOULD BE WORN.

CHEMICALLY RESISTANT GOGGLES, SAFETY GLASSES, OR A FACE SHIELD SHOULD BE USED.

IF AIRFLOW IS NOT SUFFICIENT TO KEEP EXPOSURE BELOW APPROPRIATE LIMITS, PLEASE USE A CARTRIDGE

FILTER MASK SUITABLE FOR ORGANIC VAPOURS AND PARTICULATE MATTER. IN EXTREME CASES, AN AIR-FED

HELMET SHOULD BE USED.

DO NOT APPLY THIS PRODUCT IF YOU HAVE BECOME SENSITIZED TO THE CHEMICAL ENTITIES LISTED IN THIS

PUBLICATION OR THE MATERIAL SAFETY DATA SHEET FOR THE EPOXY RESIN TO BE USED WITH THIS PRODUCT.

PERSONS WITH ASTHMA, BRONCHITIS, OR OTHER LUNG COMPLAINTS SHOULD AVOID THIS AND OTHER

INDUSTRIAL COATINGS WHICH MAY TRIGGER AN ATTACK.

IT IS RECOMMENDED THAT USERS OF THIS PRODUCT AND OTHER INDUSTRIAL COATINGS BECOME CONVERSANT

WITH AUSTRALIAN STANDARDS FOR PERSONAL PROTECTIVE EQUIPMENT: (AS 1336, 1337, 1715, 1716, 2161, 2919, AND

3765)

DO NOT SMOKE WHILE USING THIS PRODUCT. WHILE USING THIS PRODUCT, WASH HANDS THOROUGHLY BEFORE

EATING, SMOKING, OR USING TOILET FACILITIES. CLEAN CONTAMINATED CLOTHING OR PERSONAL PROTECTIVE

EQUIPMENT BEFORE REUSING. CONSIDER THE USE OF AN INDUSTRIAL LAUNDRY SPECIALIZING IN TWO-

COMPONENT COATINGS.

CONTINUED NEXT PAGE

THIS PRODUCT IS FLAMMABLE.

DO NOT USE OR STORE IN THE PRESENCE OF HEAT, NAKED FLAMES, SPARKS, OR OXIDIZING MATERIALS. TAKE

PRECAUTIONS AGAINST DISCHARGES OF STATIC ELECTRICITY. DO NOT ALLOW EXPLOSIVE VAPOUR TO BUILD UP.

UTILIZE ADEQUATE VENTILATION.

REF: SEHB1000B

MATERIAL SAFETY DATA SHEET

PAGE 4 OF 4

COMPANY:

MACLEOD INDUSTRIES AUSTRALIA PTY LTD

DATE OF ISSUE:

JUNE 2004

PRODUCT NAME:

SWIFTEPOXY HB, PART B

THIS PRODUCT IS HAZARDOUS ACCORDING TO THE CRITERIA OF WORKSAFE AUSTRALIA

THIS PRODUCT IS USED IN CONJUNCTION WITH SWIFTEPOXY HB, PART A. ENSURE YOU

HAVE BOTH MATERIAL SAFETY DATA SHEETS IN YOUR POSSESSION.

R20/22: HARMFUL BY INHALATION AND IF SWALLOWED.

R43:

MAY CAUSE SENSITISATION BY SKIN CONTACT.

R11:

HIGHLY FLAMMABLE

CLASSIFIED AS A DANGEROUS GOOD, CLASS 3.2, SUBSIDIARY RISK 8, PACKAGING GROUP III, FOR TRANSPORT

PURPOSES.

STORE IN A WELL-VENTILATED STOREROOM AWAY FROM IGNITION SOURCES.

DO NOT STORE NEAR OXIDIZING AGENTS, STRONG ACIDS, OR STRONG BASES. DO NOT STORE NEAR FOODSTUFFS.

STORE IN A DRY LOCATION BETWEEN 5º - 30º C. KEEP OUT OF REACH OF CHILDREN.

HAZCHEM CODE 3X

ENSURE THERE IS NO SOURCE OF IGNITION. WEAR APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT. CONTAIN

THE SPILL WITH SAND, EARTH, OR OTHER ABSORBENT MATERIAL. PLACE THIS ABSORBENT MATERIAL IN A

SEALED CONTAINER AND CONSULT A QUALIFIED HAZARDOUS GOODS DISPOSAL COMPANY FOR DISPOSAL WHICH

CONFORMS TO THE RELEVANT STATE AND COMMONWEALTH REGULATION.

DO NOT ALLOW THIS PRODUCT TO ENTER THE WATERWAYS.

THIS PRODUCT IS A HIGHLY FLAMMABLE LIQUID. COMBUSTION OF THIS PRODUCT PRODUCES OXIDES OF CARBON

AND NITROGEN. OTHER TOXIC GASES/VAPOURS MAY ALSO BE CREATED.

USE SELF-CONTAINTED BREATHING APPARATUS AND FULL BODY PROTECTIVE CLOTHING.

SOME OF THE SOLVENTS IN THIS PRODUCT CAN FORM EXPLOSIVE VAPOURS.

USE FOAM, DRY CHEMICAL, CO2, OR WATER SPRAY AS EXTINGUISHING MEDIA.

THIS PRODUCT MAY REACT WITH STRONG OXIDIZING AGENTS.

SOME COMPONENTS OF THIS PRODUCT ARE CONSIDERED A HAZARD TO AQUATIC LIFE. DO NOT ALLOW THIS

PRODUCT OR ITS HARDENER TO ENTER WATERWAYS OR SUBSOIL. FULLY CURED AND DRIED PRODUCT IS NOT

BIOLOGICALLY AVAILABLE. . THE EPOXY RESIN USED IN CONJUNCTION WITH THIS PRODUCT IS A INJURIOUS TO

AQUATIC LIFE IN ITS UNCURED STATE. THIS CONTAINER THIS PRODUCT IS SHIPPED IN SHOULD BE RESEALED

AFTER USE. MACLEOD INDUSTRIES AUSTRALIA WILL ACCEPT PACKAGING FOR ANY OF ITS PRODUCTS FOR SAFE

DISPOSAL. IF THIS IS NOT PRACTICABLE, PLEASE CONTACT YOUR COUNCIL OR AN INDUSTRIAL WASTE DISPOSAL

COMPANY FOR APPROPRIATE INFORMATION. THIS MATERIAL AND ITS CONTAINER MUST BE DISPOSED OF AS

HAZARDOUS WASTE.

THIS MSDS IS OFFERED IN GOOD FAITH, AND REPRESENTS THE BEST KNOWLEDGE AVAILABLE TO THE AUTHOR AS

TO THE APPROPRIATE HEALTH AND SAFETY ISSUES PERTAINING TO THIS PRODUCT. THE USER SHOULD READ THIS

MSDS AND THE MSDS FOR PART A TO BE USED WITH THIS PRODUCT AND RELATE IT TO HOW HE/SHE WILL BE

USING THE PRODUCT. SOME RISK OR SAFETY PHRASES HAVE BEEN USED WHERE THEY MAY NOT HAVE BEEN

MANDATED BY REGULATION, BUT WHERE THE AUTHOR BELIEVES THAT PROVIDING THOSE RISK OR SAFETY

PHRASES IS IN THE INTEREST OF THE USER.

AUTHOR: MIKE FINKE